|||||||||

MTX 12-Inch (1200W) Dual Subwoofer Box with 1100W Amplifier, Wiring Kit and 2-Farad Capacitor

£47.75
Skip to product information
|||||||||

MTX 12-Inch (1200W) Dual Subwoofer Box with 1100W Amplifier, Wiring Kit and 2-Farad Capacitor

£47.75

Build a bass system the easy way with the MTX TNE212D, a sealed dual 12-inch subwoofer enclosure paired with everything you need to install it. The carpeted cabinet houses two Terminator subwoofers driven by a monoblock amplifier, and the package arrives with a complete wiring kit and a digital capacitor so you can finish the install in one trip.

Features

  • Sealed dual 12-inch enclosure built from sturdy 16 mm (5/8 inch) thick MDF for tight, accurate bass
  • Two subwoofers rated at 200 watts RMS each, reaching 400 watts RMS or 800 watts peak for the whole box
  • Spider Plateau Venting adds mechanical cooling for longer driver life
  • Lightweight polypropylene dust caps and cones with rubber surrounds and a 2-inch aluminum voice coil rated at 4 ohms
  • Single binding post output impedance of 2 ohms per connected amplifier
  • Includes the BOSS Audio R110M Riot 1100-watt monoblock A/B amplifier with remote control

Specifications

  • Subwoofer: MTX TNE212D 12-inch, 1200W max, 48 oz. magnet, 2 ohm end impedance
  • Frequency response: 37-150 Hz
  • Enclosure dimensions (H x W x D1 x D2): 35.6 x 75.9 x 34.3 cm
  • Amplifier: 413 watts RMS x 1 at 4 ohms, 825 watts RMS x 1 at 2 ohms
  • Amplifier power: 550 watts MAX x 1 at 4 ohms, 1100 watts MAX x 1 at 2 ohms, 2 ohm stable
  • Bass boost: switchable up to 18 dB; low-pass filter 35 Hz to 160 Hz
  • Signal-to-noise ratio: >102 dB; THD: 0.01%; amplifier weight: 2.7 kg
  • Amplifier dimensions (L x W x H): 23.2 x 26.5 x 5.7 cm
  • Capacitor: 2 Farads (2 million microfarads), 24 V high-level / 20 V low-level input, 10% tolerance
  • Capacitor ESR: 0.00195 ohms at 120 Hz and 25 °C; dimensions 26.2 x 7.6 x 7.6 cm

Package Contents

  • MTX 12-inch dual subwoofer enclosure x 1
  • BOSS Audio monoblock amplifier with remote control x 1
  • Sound Storm AKS8 8-gauge installation wiring kit: 6 m power cable, 3-foot 8 AWG ground, 16-foot 18 AWG turn-on wire, 20-foot RCA cable, 3-foot speaker wire, 3 grommets, 20 x 4-inch cable ties and gold-plated ring terminals
  • BOSS Audio 2-farad digital capacitor with remote screw and red LED display

Quick Specs

  • Enclosure: MTX TNE212D, 1200 W maximum, 400 W RMS, 28.3 cm depth, 16 mm MDF
  • Amplifier: 1100 W max monoblock, 413 W RMS at 4 ohms, 825 W RMS at 2 ohms
  • Capacitor: 2 farads, 24 V high-level / 20 V low-level, 28.3 cm body
  • Wiring kit: 8-gauge, 6 m power cable, 20-foot RCA

You may also like